build your own blaster
download jspb3d free (Beta)
ASTM Standards SCH40
|
CNS (Chinese National Standards)1298 台規
|
CutAway Diagram
To reload the JSPB3D, load a dart into the Chamber.
Pump up to 2 times then press the trigger to fire.
Chisel the path you need
WARNING!
2. All products are designed to be used by adults with full eye protection and in accordance with all local laws and ordinances.
upgrade your jspb3d
JSPB3D foot [Digital]
ATSM Standards SCH40 and CNS files include.
JSPB3D SCH40 foot.STL
JSPB3D CNS foot.STL
W: 53mm
D: 56 mm
H: 47 mm
JSPB3D Extend block[Digital]
ATSM Standards SCH40 and CNS Files include.
JSPB3D SCH40 Extend block.STL
JSPB3D CNS Extend block.STL
W: 62.25mm
D: 64.094 mm
H: 23.658 mm
JSPB3D Cover [Digital]
ATSM Standards SCH40 and CNS files include.
W: 62.2 mm
D: 62.1 mm
H: 14.6mm
JSPB Head [Digital]
2.Can be fitted with front grip.
ATSM Standards SCH40 and CNS files include.
JSPB3D SCH40 head.STL
JSPB3D CNS head.STL
W: 61.4 mm
D: 76.2 mm
H: 58 mm
JSPB3D Dual-airway
ATSM Standards SCH40 and CNS files include.
JSPB3D SCH40 dual-airway.STL
JSPB3D CNS dual-airway.STL
W: 61.4 mm
D: 76.2 mm
H: 58 mm
Blaster display [DIGITAL]
Adopt the brief and smooth modernism style.
There are two holes in the display rack to install the stakes, Octagon stakes can be adjusted at different angles, in addition to the length and height changes.
玩具槍展示架,簡約現代的造型適合各種展示區,展示架有兩個孔可安裝樁子,8角形的樁可調整不同角度.此外也有長度與高低的變化.
This file contains two height display stands, as well as two different stakes.
此檔案包含兩種高度的展示架,以及兩種不同的樁子.
Blaster display_L/155.7mmX164.1mmX288.4mm
Blaster display_s /155.7mmX164.1mmX179.6mm
Blaster display_arm/103.8mmX105.3mmX23.0mm
Blaster display_c_arm/115.2mmX82.1mmX23.0mm
Blaster display_hook/25.6mmX25.6mmX105.1mm
Blaster display_long_hook/25.6mmX25.6mmX130.1mm
Ver 1.2 Add those file:
Blaster display_thickening/155.7mmX164.1mmX288.4mm
Blaster display_thickening_s /155.7mmX164.1mmX179.6mm
Blaster display_stryfe/112.3mmX93.3mmX23.0mm
Blaster display_recon/112.3mmX93.3mmX39.4mm
JSPB EZ7
Easy & Fun to 3D Print
- Easy to print , No support!
- Easy to build , No Screws!
- 2 Piece , Requires poke and darts
*The piston is tight and needs to be sanded with sandpaper
User contributions
JSPB3D HEAD(SCH40)
by: Meaker VI
|
JSPB3D HEAD(CNS)
by: lulu
|
JSPB3D SIGHT(CNS)
by: lulu
|
JSPB3D MUZZLE(CNS)
by: lulu
|